Building a grow box for bonsai in training
- Clicio
-
Offline
Topic Author
- Platinum Member
-
- Posts: 3555
- Thanks received: 1549
Building a grow box for bonsai in training was created by Clicio
Posted 5 years 1 week ago
A very simple grow box made to last 3 years.
Total cost:€ 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
Bottom with feet.
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
Total cost:€ 12
Material used: 6 pieces of stained pinus planks, cut 40x40cm, steel screws, plastic draining mesh.
Attachment LRM_EXPORT_7720642419477_20190608_163658423-1024x1024.jpeg not found
Screw in the 4 sides of the box. Screw in the bottom planks. Add 2 feet to lift the box from the ground.
Attachment LRM_EXPORT_7610084182171_20190608_163507865-1024x1024.jpeg not found
Staple the mesh to the bottom of the box.
Attention: heavy duty Japanese mesh was used, from Daiso
Attachment LRM_EXPORT_7812514557334_20190608_163830295-1024x1024.jpeg not found
Bottom with feet.
Attachment LRM_EXPORT_7646729285645_20190608_163544510-1024x1024.jpeg not found
Not beautiful, but works very well.
Side note: When one has free time on Saturday it's good to build some useful tools. At least I like it.
This message has attachments images.
Please log in or register to see it.
Please Log in or Create an account to join the conversation.
